MIEKA MIE-WP10 Wireless PET Immune PIR Sensor

MIEKA MIE-WP10 Wireless PET Immune Detector

The MIE-WP10 PIR detector adopts digital dual-core fuzzy logic control processing technology and intelligent analyze algorithm. When human body’s infrared spectrum is detected, it will send alarm signal to the control panel.
The detector features pet immunity for animals up to 25kgs.

If the PIR motion detector detects movements twice in 3 minutes, it automatically goes into sleep state. If there is no movement detected in the next 3 minutes, it will switch from sleep state to arm. During the 3 minutes, the detector won’t be active and will not send any signal to the control panel. As long as there is a movement detected within the 3 minutes, the duration of power saving mode will be extended.

Different Working Modes for Different Requirements

Open the rear cover of the detector; change the array of jumpers on the zone setting to the corresponding position as below (Mind the direction of D0-D3):

General Features

MIE-WP10 sensor can detect any motion in up to 8 metre MIE-WP10 sensor adopts a special design to improve detection accuracy. Pets less than 25kgs will not trigger the alarm.

Working Modes

Technical Specification

Power Supply : DC 3V (AA 1.5V LR6 Battery x 2 pcs )
Static Current : <50 uA
Alarm Current : 9.5mA
Detection Scope : 8m/110°
Transmitting Distance : <80 m (open area/no interference)
Radio Frequency : 315 MHz or 433.92 MHz
Housing Material : ABS Plastic
Operating Temperature : 0°C~+55°C
Relative Humidity : <80% (non-condensing)
Detector Dimensions : 100 x 59 x 43 mm (L x W x H)
Bracket Dimensions : 52 x 30 x 26.5 mm (L x W x H)
WhatsApp Contact