APOLLO Series 60 Ultraviolet (UV) Flame Detector
The Apollo Series 60 Ultraviolet (UV) Flame Detector is designed especially for indoor applications where flame-based fires are expected. Its fast-response UV sensor enables flame detection up to 25 meters, while the detection principle helps distinguish radiation sources that could otherwise lead to false alarms, providing reliable protection.
For correct operation, it is recommended/required to use the detector together with the 45681-200APO mounting base.
With its wide supply voltage range, industrial temperature tolerance and standards approvals, it offers a compatible solution for safety and fire detection systems.
Key Features
- Indoor UV flame detection: Designed for areas where flame-based fire risk is expected.
- Fast detection & 25 m range: UV sensor structure supports detection up to 25 meters.
- Helps reduce false alarms: Helps differentiate radiation emissions that may cause false alarms.
- Wide supply range: 9–33 V DC supply for flexibility across different applications.
- Temperature tolerance: Suitable for operating and storage conditions between -20°C and +60°C.
- Standards approvals: EN54-10:2002 Class 1 and LPCB Class 3 approved.
- Mounting base requirement: Must be used with the 45681-200APO mounting base.
Technical Specifications
| Item | Value |
|---|---|
| Product | Apollo Series 60 Ultraviolet (UV) Flame Detector |
| Supply Voltage | 9–33 V DC |
| Detection Range | 25 m (depending on application conditions) |
| Operating / Storage Temperature | -20°C … +60°C |
| Compliance / Approvals | EN54-10:2002 Class 1, LPCB Class 3 |
| Mounting | Must be used with the 45681-200APO mounting base |
| Other Technical Details | For detailed information, the datasheet / technical documentation should be used as the reference. |
Installation Notes & Frequently Asked Questions
Installation & Wiring Notes
- Install the detector with a direct line of sight to the expected flame area, in line with your site risk assessment.
- To reduce false alarm risk, review placement in areas with strong UV sources or equipment that may generate interference.
- Provide supply voltage within 9–33 V DC; calculate cable cross-section and voltage drop according to project conditions.
- Use the detector together with the 45681-200APO mounting base.
- During commissioning, perform site tests and system integration tests (alarm scenario / monitoring scenario).
Note: Always follow the official technical documentation for final installation and commissioning steps.
FAQ – Frequently Asked Questions
-
Where is the Apollo Series 60 UV flame detector used?It is designed for indoor areas where flame-based fire risk exists (as determined by risk assessment).
-
Is the mounting base required?Yes. This detector must be used with the 45681-200APO mounting base.
-
What is the supply voltage range?It has a wide supply voltage range of 9–33 V DC.
-
Which standards does it comply with?It is listed as EN54-10:2002 Class 1 and LPCB Class 3 approved.
