APOLLO Orbis ORB-HT-51158-APO I.S. A1S Heat Detector with Flashing LED
The Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.
General Features
- Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under normal conditions Reduced incidences of false alarms Increased reliability of detection
Technical Specification
| Model No - Description : | Apollo Orbis ORB-HT-51158-APO I.S. A1S Heat Detector with Flashing LED |
|---|---|
| Applications : |
|
| Chamber type : | Chevron |
| Heat classification | A1S |
| Polarity : | L1 & L2 are polarity insensitive. |
| Sampling Frequency : | Once every 2 seconds |
| Minimum Detector Activate Voltage : | 12V |
| Holding Voltage (Min) : | 5V |
| Minimum voltage to light alarm LED : | 6V |
| Alarm load : | 325Ω in series with a 1.0V drop |
| Humidity (min) : | 0% RH |
| Humidity (max) : | 98% RH |
| Humidity Note : | no condensation or icing |
| Humidity : | 0% to 95% (no condensation or icing) |
| Operating temperature (min) : | -20°C |
| Operating temperature (max) : | 90°C |
| Operating temperature : | -20 to 90°C |
| IP rating Value : | IP23D |
| Storage temperature (min) : | -30°C |
| Storage temperature (max) | 120°C |
| Storage temperature | -30 to 120°C |
| Standards | EN 54-5 |
| Approvals |
|
| Weight | 70gr |
| Colour | White |
| Materials housing | Polycarbonate |
| Product length | 42mm |
| Product diameter | 100mm |
