APOLLO Orbis ORB-HT-51156-APO I.S. CS Heat Detector with Flashing LED
The Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.
General Features
- Can be used for applications where smoke detectors are unsuitable
- Ideal for environments that are dirty or smoky under normal conditions
- Reduced incidences of false alarms
- Increased reliability of detection
Technical Specification
| Model No - Description : | Apollo Orbis ORB-HT-51156-APO I.S. CS Heat Detector with Flashing LED |
|---|---|
| Applications : |
|
| Chamber type : | Chevron |
| Heat classification | CS |
| Polarity : | L1 & L2 are polarity insensitive. |
| Holding voltage (min) : | 6V |
| Holding voltage (max) : | 6V |
| Holding voltage : | 6 to 6V |
| Minimum voltage to light alarm LED : | 12V |
| Alarm load : | 420Ω in series with 2V drop |
| Humidity (min) : | 0% RH |
| Humidity (max) : | 95% RH |
| Humidity Note : | no condensation or icing |
| Humidity : | 0% to 95% (no condensation or icing) |
| Operating temperature (min) : | -20°C |
| Operating temperature (max) : | 90°C |
| Operating temperature : | -20 to 90°C |
| IP rating Value : | IP23D |
| Storage temperature (min) : | -30°C |
| Storage temperature (max) | 120°C |
| Storage temperature | -30 to 120°C |
| Standards | EN 54-5 |
| Approvals |
|
| Weight | 80gr |
| Colour | White |
| Materials housing | Polycarbonate |
| Product length | 42mm |
| Product diameter | 100mm |