APOLLO Orbis ORB-HT-51146-APO I.S. A1R Heat Detector with Flashing LED
The Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.
APOLLO Orbis ORB-HT-51146-APO I.S. A1R Heat Detector is used where not sudden increase possible in heat likely in normal operation. ORB-HT-51146-APO is a Rate-of-rise detector which has a fixed upper limit but it also measure the rate of increase in temperature.
General Features
- Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under normal conditions Reduced incidences of false alarms Increased reliability of detection
Technical Specification
| Model No - Tanım : | 55000-121APO Konvansiyonel Sıcaklık Dedektörü |
|---|---|
| Applications : |
|
| Chamber type : | Chevron |
| Heat classification | A1R |
| Polarity : | L1 & L2 are polarity insensitive. |
| Holding voltage (min) : | 6V |
| Holding voltage (max) : | 6V |
| Holding voltage : | 6 to 6V |
| Minimum voltage to light alarm LED : | 12V |
| Alarm load : | 420Ω in series with 2V drop |
| Humidity (min) : | 0% RH |
| Humidity (max) : | 95% RH |
| Humidity Note : | no condensation or icing |
| Humidity : | 0% to 95% (no condensation or icing) |
| Operating temperature (min) : | -20°C |
| Operating temperature (max) : | 90°C |
| Operating temperature : | -20 to 90°C |
| IP rating Value : | IP23D |
| Storage temperature (min) : | -30°C |
| Storage temperature (max) | 120°C |
| Storage temperature | -30 to 120°C |
| Standards | EN 54-5 |
| Approvals |
|
| Weight | 80gr |
| Colour | White |
| Materials housing | Polycarbonate |
| Product length | 42mm |
| Product diameter | 100mm |