APOLLO 55100-031APO Conventional IS Manual Call Point
The Conventional IS Manual Call Point has been designed to operate on conventional intrinsically safe fire detection systems. Designed specifically for use in atmospheres in which explosive mixtures are or may be present, certain design considerations must be observed. The Manual Call Point is available in two versions, indoor and outdoor in either red or yellow.
General Features
- Can be used for applications where smoke detectors are unsuitable
- Ideal for environments that are dirty or smoky under natural conditions
- Wide operating voltage
- Flashing LED and magnet operated test switch option
Technical Specification
| Model No - Description : | Apollo 55100-031APO Conventional IS Manual Call Point |
|---|---|
| Applications : |
|
| Chamber type : | Chevron |
| Heat classification | A1R |
| Polarity : | L1 & L2 are polarity insensitive. |
| Holding voltage (min) : | 6V |
| Holding voltage (max) : | 6V |
| Holding voltage : | 6 to 6V |
| Minimum voltage to light alarm LED : | 12V |
| Alarm load : | 420Ω in series with 2V drop |
| Humidity (min) : | 0% RH |
| Humidity (max) : | 95% RH |
| Humidity Note : | no condensation or icing |
| Humidity : | 0% to 95% (no condensation or icing) |
| Operating temperature (min) : | -20°C |
| Operating temperature (max) : | 90°C |
| Operating temperature : | -20 to 90°C |
| IP rating Value : | IP23D |
| Storage temperature (min) : | -30°C |
| Storage temperature (max) | 120°C |
| Storage temperature | -30 to 120°C |
| Standards | EN 54-5 |
| Approvals |
|
| Weight | 80gr |
| Colour | White |
| Materials housing | Polycarbonate |
| Product length | 42mm |
| Product diameter | 100mm |
