3MK-PTC1-220V Pan-Tilt Controller Unit
The 3MK-PTC1-220V pan-tilt controller unit is used to control one pan-tilt motor. The system infrastructure is formed by running a 6-core (minimum) power cable with a conductor cross-section of 0.75 mm² (minimum) between the pan-tilt motor and the controller unit.
Manual direction control is available via the Right / Left / Up / Down buttons on the unit. In addition, the unit includes an Auto lever to enable automatic left-right movement of the motor.
Key Features
- 1-Channel Pan-Tilt Controller: Controls a single pan-tilt motor.
- 220V AC, 50Hz power supply: Operates from standard mains voltage.
- Auto control lever: Supports automatic left-right movement.
- Manual direction buttons: Right, left, up and down movement control.
- Recommended cabling: 6-core cable, min. 0.75 mm² conductor cross-section between motor and unit.
Technical Specifications
| Item | Value |
|---|---|
| Product | 3MK-PTC1-220V Pan-Tilt Controller Unit |
| Channel | 1 channel (single pan-tilt motor) |
| Power | 220V AC, 50Hz |
| Control | Manual (Right/Left/Up/Down) + Auto lever (automatic left-right) |
| Recommended Wiring | 6-core power cable, minimum 0.75 mm² conductor cross-section between motor and unit |
| Note | For detailed technical information, project requirements and application documentation should be considered as the reference. |
Installation Notes & Frequently Asked Questions
Installation & Wiring Notes
- Place the controller unit where the operator can easily access it and where a safe cable route can be created.
- Use a 6-core cable with a minimum conductor cross-section of 0.75 mm² between the motor and controller unit to ensure safe infrastructure with respect to voltage drop and durability.
- Connect the 220V supply line in accordance with relevant electrical standards, using appropriate fuse/protection devices.
- During commissioning, verify movement via the manual direction buttons, then test automatic left-right operation using the Auto lever.
Note: Final installation should be engineered according to site conditions, cable distance and motor specifications.
FAQ
-
What is the 3MK-PTC1-220V used for?It is used to provide manual direction control for 220V AC pan-tilt motors and to enable automatic left-right movement via Auto mode.
-
How many pan-tilt motors can it control?This model is 1-channel and is intended to control a single pan-tilt motor.
-
What is the minimum wiring requirement?A 6-core cable with at least 0.75 mm² conductor cross-section is recommended between the motor and controller unit.
-
How do I enable automatic movement?Automatic left-right movement can be enabled using the Auto lever on the unit.
